Call us now : 01634 239647

Datatool Demon Evo Alarm

Stock Status:   Out Of Stock
Product Brand:   Datatool
Product Code:   02000145
£89.95
Sorry, this item is out of stock

Email Me When Back In Stock
Send to a friend



Key Facts:

  • Easy fit, movement sensing and voltage sensing alarm system

  • No soldering required, connects direct to battery

  • LED status light provides visual deterrent


Optional Facts:

  • Supplied with 2 remote transmitters

  • Movement sensitivity adjustable via remote control

  • 24 month warranty


The Datatool Demon Evo is an easy to fit alarm system designed for motorcycles and scooters with a 12v battery. Using a sophisticated movement sensor, the Demon Uno constantly monitors for signs of unauthorised movement, triggering the loud integrated siren when the movement exceeds the permitted level. The movement sensor can be adjusted via the remote control to one of three levels to customise the alarm to your preference.

The Demon Evo also monitors the battery voltage, triggering the alarm if the voltage rises suddenly indicating the engine has been started and also provides visual notification of a low battery by reducing the flash rate of the deterrent LED.
In addition to adjustable movement sensitivity, the Demon Evo can also feature:

  • Transport Mode: Ability to arm without movement sensing if the bike or scooter is being transported.

  • Alarm Diagnostics: If the alarm has triggered whilst you were away, the Demon Evo will bleep a code to tell you which input caused the trigger.

  • Panic Mode: The ability to trigger the alarm from the remote control

  • Automatic Rearm: With this optional feature enabled, the Demon Evo will rearm automatically if the alarm is disarmed and the engine isn’t started within 30 seconds.

  • Arm/Disarm Tones: Another optional feature, the Demon Evo can be programmed to ‘chirp’ on arm and disarm and there are 2 options on the ‘chirp’ volume. Note: Certain countries including the UK require alarms to arm/disarm silently, check legislation for your country.

  • Optional Seat Switch / Luggage Loop: Separate trigger wire which can be used in conjunction with a magnetic seat switch or inline connector to extend the level of protection.

The Datatool Demon Evo is supplied prewired with an inline fuse and terminals ready to connect direct to the vehicle battery and the LED is a plug-in connection meaning no soldering is required to install. In addition to the deterrent effect of the LED, the Demon Evo is also supplied with a ‘Protected by Datatool’ decal to highlight to potential thieves that security is installed.
 

Write an online review and share your thoughts with other shoppers!

Be the first to review this product