LTM7L JMT Premium LTM Lithium ion battery

Product code: 707.01.12
£54.50
£46.95
Replacement battery for:: YB6,5L-B, 12N7A-3A, YB4L-A, YB4L-B, 12N5,5-3B, 12N7D-3B, YTZ5S, 12N7-3B, YTX7L-BS, 12N7CZ 3D, YTX5L-BS, 12N4-3B, YB5L-B, YB7L-B. YTZ7S, 12N5-3B and YTX4L-BS
LTM7L JMT Premium LTM Lithium ion battery

The Powersports lithium-ion batteries of the LTM-Line are characterized by a heat-resistant, waterproof nylon housing and improved terminal connections.

 
Technical Specifications
Voltage 12v
Capacity 2 Ah (10 Std) 24 Wh
Manufacturer claimed CCA 120 A
Length 107 mm
Width 56 mm
Height 85 mm
Weight 0.6 kg
Terminal connection Front from above
Positive terminal Front right
Negative terminal Front left






 
 




Indicator (I)
All batteries are equipped with an improved battery indicator, which indicates the status of the battery more accurately.
Simply press the test button to display the charge status of the battery.
 
By replacing a standard lead-acid battery with a JMT lithium-ion battery up to 5 kg in weight can be saved, without any appreciable effort.
 
Following advantages speak for JMT lithium-ion batteries:
  • About 1/3 of the weight of comparable lead acid battery
  • Pole connections brass for best conductivity
  • Waterproof
  • Completely black battery case
  • Battery case made of nylon, thus deformation in the heat is practically impossible
  • Unbeatable ratio of cost / weight saving
  • Can be mounted in any position
  • Contains no heavy metals
  • Balanced discharge / charge of all cells by Balancer
  • ​Fast charging with high charging current (up to 90% in 6 min)
  • Very low self-discharge (max. 5% per month)
  • Even at high temperatures still good performance up to 60 ° C
  • Safe technology and high durability
 
Lead-acid batteries can be used only 30% of its capacity due to the specific characteristics, while nearly 100% of the capacity can be used in lithium ion batteries.
For this reason, lithium version of JMT batteries for the same starting power need only 1/3 of the capacity of a comparable lead-acid battery.
A steady state of charge of all cells is also ensured by a built-in processor ( "balancer").
The dimensions of lithium-ion batteries comply with the help of adapters with a size of original lead-acid batteries.
The ports are the same, so the battery can be replaced without further adjustments in a few minutes.
 
Although JMT lithium-ion batteries discharge at a slower rate than conventional batteries it is vital that they are not allowed to go completely flat. Please regularly use the charge indicator on the top of the battery to assess it's state of charge especially if the bike has not been ridden for some time.

JMT lithium-ion batteries can be charged with conventional chargers but it is best to check that the charger is suitable for a lithium-ion battery. Some maintenance chargers have a recovery mode for sulphated lead acid batteries. These chargers should not be used with a lithium-ion battery as in recovery mode high voltage levels can damage them irreparably. If in doubt purchase a battery charger suitable for lithium-ion such as some of the examples below.
 
The manufacturer guarantees a sufficient initial capacity of up to -5 degrees Celsius.
 
Technology:
JMT use lithium-ion batteries as a cathode material iron phosphate (LiFePO4), and use the lithium-polymer process in the manufacture. This allows them to rise even explode either in flames during normal operation.
The technology and the manufacturing process ensure the highest safety standards for lithium batteries.

Identical in construction to:
 YB6,5L-B
12N7A-3A
YB4L-A
YB4L-B
12N5,5-3B
12N7D-3B
YTZ5S
12N7-3B
YTX7L-BS
12N7CZ 3D
YTX5L-BS
12N4-3B
YB5L-B
YB7L-B
YTZ7S
12N5-3B
YTX4L-BS
Own this product? Let us know what you think.
Brand JMT
Code 707.01.12
Weight 0.6kg